You are currently viewing

FXP PERMANENT LIFTING MAGNETS for Thin Sheets and Pipe

Ideal for thin sheets or parts, tanks/containers and thin-walled pipe that normally can’t be lifted with a permanent, On/Off magnet. The magnetic field on the FXP is concentrated and shallow to drive the strength into thin material.

 

  • On/off Rare Earth Permanent Magnet
  • On/off handle only requires 90° rotation and locks at both on/off positions
  • Recessed metal name plates, not stickers
  • Corrosion resistant, plated-magnet surface
  • Heat resistant up to 180°F (82°C)
  • 3:1 Design Factor
  • 2018 ASME B30.20 BTH-1 Design Category B, Service Class 3

$562.94$1,332.35

Clear

FXP PERMANENT LIFTING MAGNETS for Thin Sheets and Pipe

FXP PERMANENT LIFTING MAGNETS for Thin Sheets and Pipe

Ideal for thin sheets or parts, tanks/containers and thin-walled pipe that normally can’t be lifted with a permanent, On/Off magnet. The magnetic field on the FXP is concentrated and shallow to drive the strength into thin material.

 

  • On/off Rare Earth Permanent Magnet
  • On/off handle only requires 90° rotation and locks at both on/off positions
  • Recessed metal name plates, not stickers
  • Corrosion resistant, plated-magnet surface
  • Heat resistant up to 180°F (82°C)
  • 3:1 Design Factor
  • 2018 ASME B30.20 BTH-1 Design Category B, Service Class 3

Description

FXP PERMANENT LIFTING MAGNETS for Thin Sheets and Pipe

Ideal for thin sheets or parts, tanks/containers and thin-walled pipe that normally can’t be lifted with a permanent, On/Off magnet. The magnetic field on the FXP is concentrated and shallow to drive the strength into thin material.

  • On/off Rare Earth Permanent Magnet
  • On/off handle only requires 90° rotation and locks at both on/off positions
  • Recessed metal name plates, not stickers
  • Corrosion resistant, plated-magnet surface
  • Heat resistant up to 180°F (82°C)
  • 3:1 Design Factor
  • 2018 ASME B30.20 BTH-1 Design Category B, Service Class 3

View FXP Specs

 WLLOverallMagnetHandleBail 

 

Model No.LBSKGHeight (in)Length (in)Height (in)Width (in)Length (in)Length (in)Thickness (in)Height (in)Width (in)Weight (lbs)
FXP03753751705.37.72.72.56.85.30.41.6112
FXP07257253306.710.43.53.49.47.50.521.628
FXP14501450650813.84.24.412.690.62.4258

 

Working Load Limit (WLL) in lbs (kg) & *Max sheet Length Due To Sag For Material Thickness For Single Magnet UseRound Lifting Applications
Model No.9 ga (6′)3/16 (6′)1/4 (6′)3/8 (8′)1/2 (8′)3/4 (8′)1 (10′)WLL RDMin/Max DiaMin Thk
FXP0375176 (80)200 (91)265 (120)375 (170)375 (170)375 (170)375 (170)330 (150)1 – 45/16
FXP0725220 (100)275 (125)353 (160)725 (329)725 (329)725 (329)725 (329)660 (300)2 – 6.51/2
FXP1450353 (160)375 (170)441 (200)1060 (481)1125 (510)1450 (658)1450 (658)1210 (550)3 – 95/8

 

Additional information

WeightN/A
DimensionsN/A
Manufacturer

Lift Capacity (Lbs.)

, ,

Customer Login

MENU

Product out of stock? Have a specific question about a product? Contact us below

Request A Quote

MENU

Contact Us

Contact Us

  • Date Format: MM slash DD slash YYYY
  • Please use the form below to contact us.
    Please check the appropriate box to ensure we can properly respond to your inquiry.

OUR PRODUCTS

Please Fill out our online application

Application For Credit

  • Date Format: MM slash DD slash YYYY
  • Company Information
    If Yes, attach certificate
  • Accepted file types: pdf, docx, doc.
  • Trade References - All three references required for processing
  • Reference One
  • Reference Two
  • Reference Three
  • All accounts are COD until a credit application has been completed, reviewed, and approved. Upon credit approval, Applicant agrees to payment terms of NET 30 DAYS unless otherwise agreed upon. Any past due invoice is subject to a charge of 1 1/2% per month (18% annual rate); plus all costs of collection, including but not limited to attorney fees if collection becomes necessary. I hereby certify that the information contained herein is complete and accurate. This information has been furnished with the understanding that it is to be used to determine the amount and conditions of the credit to be extended. Furthermore, I hereby authorize the financial institution listed in this credit application to release necessary information to the company for which credit is being applied for in order to verify the information contained herein.
    By checking this box, you agree to submit this credit application.