Demag DMR rope hoist
Our DR-Com rope hoist has always been the ideal hoist solution for applications which demand maximum safety, reliability and efficiency. Buy a DR-Com and double your benefits – thanks to its new FEM Group classification, the new model now offers double the service life. The already low maintenance costs have been cut once more – over the entire product life cycle. The second new feature also offers full value: the increased cross-travel speed enables the new DR-Com to provide even higher handling rates.
- NEW! Even better value thanks to twice the service life
- NEW! Improved handling speed thanks to increased cross-travel speed
- Optimum utilisation of space thanks to compact design
- High availability thanks to low maintenance requirement
- Good value for money
- Low-vibration motor for quiet operation
- Fast-acting brake
- Gearbox lubricated for life
- Protective rope guide: inclined pull up to 4° without touching the rope guide
- User-friendly bottom block
- Precision geared limit switch
- User-friendly bottom block: guard for improved safety
- Three sizes with load capacities from 2 to 10 tonnes
- Design to meet specific requirements:
- EKDR-Com: low-headroom travelling hoist for minimum approach dimensions
- EZDR-Com: double-rail crab for optimum lifting height
- FDR-Com: as a single travelling hoist or for stationary operation
- Trolleys infinitely adjustable to flange widths from 200 to 420 mm
- Universal travel wheels for sloping and parallel flanges
- Optional contactor or processor control
- For contactor control: two-stage cross travel at 6/24 m/min, control via DST control pendant
- For processor control (CAN bus): variable cross-travel speeds with inverter from 5 to 24 m/min
- Electrical equipment for hoist and trolley control integrated into the hoist unit
- Control as required:
- cable-connected by means of a DSE10-R control pendant with an integrated display
- via DRC radio control (Demag radio control): receiver integrated into the hoist/crab electrical equipment
- Load spectrum recorder (optional for processor control) indicates elapsed duration of service according to the FEM group
Technical Data
| Rope hoist model | Load capacity (t) | Hook path (m) | Lifting speed V1 (min) | Group of mechanisms FEM ISO | ||
| DR 3 | reeving 4/1 | |||||
| 2 | 6; 10 | 4.5 / 0.8 | 4m | M7 | ||
| 2.5 | 3m | M6 | ||||
| 3.2 | 2m | M5 | ||||
| DR 5 | reeving 4/1 | |||||
| 4 | 6; 10 | 4.5 / 0.8 | 3m | M6 | ||
| 5 | 2m | M5 | ||||
| DR 10 | reeving 4/1 | |||||
| 6.3 | 6; 10 | 4.0 / 0.7 | 3m | M6 | ||
| 8 | 3m | M6 | ||||
| 10 | 2m | M5 | ||||
Operating voltage: 380 – 415 V, 50 Hz
Control voltage: 48 / 230 V, 50 Hz
Foot-mounted hoist, travelling hoist and double-rail crab
Type of enclosure: IP 55
