Demag offers a wide selection of cranes, electric and wire rope hoist units, drives, and handling solutions for all your material handling needs. From small workshops to large industrial enterprises, Demag cranes, hoists, and handling solutions can work separately or together to provide the perfect lifting solution for your applications.
Kinetic Equipment, Inc, a sister company of All-Lift Systems, is a proud distributor of Demag hoists and cranes. Kinetic Equipment stocks Demag hoist and crane replacement parts and is a repair center for Demag hoists and cranes in Wisconsin and Michigan.
DEMAG CHAIN HOISTS
DCM-Pro Manulift
The DCM-Pro Manulift was developed for handling loads quickly and safely with only one hand. The DCM-Pro is based on the lifting unit of the DC-Pro chain hoist and the DSM-C control unit. Thanks to the control unit which is rigidly connected to the load handling attachment, the operator only needs one hand to operate the hoist and guide the load.
DCMS-Pro Manulift
DCMS-Pro Manulift combines fast and reliable load handling with variable speed control and operation with only one hand. It is based on the lifting unit of our DCS-Pro chain hoist and our DSM-CS control unit. The wide range of performance offered by the DCMS-Pro.
Trolleys for DC chain hoists
Perfect match for DC chain hoists and ideal for installation on I-beam girders or on our KBK light crane system. For push travel or with electric positioning – these trolleys provide horizontal travel solutions tailored to meet specific requirements for our compact hoist units.
DC-Wind Chain
The DC-Wind chain hoist has been proven in operation all over the world for the maintenance and service of wind turbines. Its high lifting speeds enable it to cut maintenance and downtimes to a minimum – making a valuable contribution towards high availability and efficient operation.
DC-Com chain hoist
The right choice for everyday needs: designed for applications with normal requirements – simplicity and reliability in proven Demag quality. DC-Com units can be integrated into the rails of our KBK light crane system or installed on I-beam girders – where our U 11–U 22 generation of trolleys provides smooth transport of your loads.
DCS-Pro chain hoist
Our DCS-Pro chain hoist offers high efficiency and reliability to ensure maximum precision in assembly operations – for gently and safely lifting, lowering and positioning valuable and sensitive parts. Thanks to almost double rated speed in the partial load range, lifting motions can be performed very quickly.
DC-Pro chain hoist
The DC-Pro chain hoist is a fully featured, highly versatile chain hoist, which can be installed and put into service in minimum time. Many features that have to be ordered and bought as extras elsewhere are already integrated as standard.
DEMAG ROPE HOISTS
Demag DMR rope hoist
Thanks to its modular design, the DMR provides a unique range of possible combinations, enabling you to configure your rope hoist to meet your specific needs for the perfect solution.
DR-Pro rope hoists
Our DR-Pro rope hoists meet all requirements for state-of-the-art hoists to satisfy tomorrow’s needs. Besides their space-saving design and particularly long service life, they also offer high lifting speeds for faster handling rates. Comprehensive standard features provide excellent value for money.
DH hoist units
Our DH hoist units can be used in a wide variety of applications, both as a travelling hoist on cranes or monorails and as stationary solutions.
DR-Com rope hoists
Our DR-Com rope hoist has always been the ideal hoist solution for applications which demand maximum safety, reliability and efficiency.
DEMAG UNIVERSAL CRANES
V-type crane
The V-type crane revolutionises load handling. Its innovative design featuring tapered diaphragm joints reduces oscillation frequency by 30%, cuts its weight by an average of 17% and doubles its service life to as many as 500,000 changes of load.
EKKE Single-girder Overhead Crane
Our EKKE single-girder overhead travelling cranes feature maximum rigidity for a minimum deadweight. This keeps the load on the crane runway to a minimum – and a cost-effective design can be selected for the building.
EPKE single-girder overhead
EPKE single-girder overhead travelling cranes are the cost-effective entry-level models in the Demag crane product range. They offer high levels of efficiency and are the optimum solution for light loads and relatively small spans.
EPKE-O – single-girder overhead
Are you looking for a crane solution that matches your standardised workshop architecture? Then the Demag EPKE-O single-girder overhead travelling crane is the right choice.
EPDE single-girder suspension
Our EPDE suspension cranes leave your entire workshop area available for production. The cranes are simply attached to the existing roof structure – columns to support the crane runway are not needed. This design saves time and costs.
EKDE single-girder suspension
Our EKDE suspension cranes are mainly characterised by high torsional rigidity thanks to their welded box-section design. The cranes run on tracks that are simply attached to the existing roof structure – columns to support the crane runway are not needed.
ZKKE double-girder overhead
Our double-girder overhead travelling cranes offer exceptional load capacity for a low deadweight. Their outstanding crane geometry also provides for extremely good travel characteristics, which minimises wear on the end carriages and crane runway.
EKWK wall-mounted cranes
Our EKWK wall-mounted travelling cranes are ideal workstation cranes for workplaces that are arranged next to each other. They are used to transport materials to the individual workstations and, at the same time, are used for positioning at assembly stations.
Crane sets
Demag crane sets guarantee maximum quality, efficiency and reliability. They are based on standardised components for a wide variety of specific application configurations.
EHPE, ZHPE semi-portal cranes
Our semi-portal cranes are not only a cost-effective alternative wherever the installation of bridge cranes would be too complicated or impossible due to structural reasons. They are also the ideal supplement to in-house logistics solutions.
EVPE, ZVPE full-portal cranes
Demag full-portal cranes can often be integrated into existing production facilities and inhouse logistics processes with only little design effort. They mainly differ from semi-portal cranes by having an integrated articulated leg, which compensates any movements.
