M2400 & BM2400

Integral housing flange engineered for NEMA 56 frame motor. C-face mounting. (NEMA 42 and 48 and IEC 71 frame motor C-face mounting options available.)
Rated loads to 2,000 lbs., depending on actuator gear ratio and motor horsepower.
Choice of 5:1 or 20:1 worm gear ratios.
Lift speeds to 170 inches per minute (varies with load and hp/rpm of motor).
Standard travel up to 24 inches. (Consult Duff-Norton engineering for longer travel options.)
Housing base bolt pattern will accept standard hydraulic and pneumatic accessories.
Can be tandem-coupled for synchronous operation.
Optional motors, limit switches and position indicating transducer available.
Clevis attachment accessories available for mounting: eye bracket, clevis bracket and pivot pin.

Duff-Norton modular actuators allow design flexibility in matching standard actuator models with drive units specifically selected to meet special or unusual operating conditions. Without time-consuming searches for "specials," designers can combine standard Duff-Norton modular actuators with AC or DC electric, air, hydraulic or explosion-proof motors to meet a wide range of application conditions.

Each modular actuator (drive motor optional) incorporates a housing mounting flange which will accept NEMA 5 C-face motor mounts (other face options are available).

The rotating screw models, feature a traveling lift nut, permit reliable load positioning in locations which are relatively free of dust, dirt and moisture. Translating tube units, with an enclosed lifting screw and translating tube, are ideally employed when environmental contamination is anticipated. The availability of optional limit switches and a position indicating transducer (indicates the percent of lift screw travel utilized) enhances the versatility of these actuators in adjusting and precisely positioning rated loads up to 2000 pounds.

Warning: Theses actuators are intended for industrial use only and should not be used to lift, support or otherwise transport people unless you have a written statement from Duff-Norton Company which authorizes the specific actuator unit, as used in your application, as suitable for moving people.