|
Aero-Motive
Reels, Balancers |
|
Coffing Hoists
Hoists, Hoist
Repair |
|
CM Hoists
Chain
Hoists, Wire Rope, Ratchet Levers, Trolley
|
|
Conductix
Power and Data Transfer Systems |
Demag
Overhead Cranes
Hoists and Winches Gearmotors
Ergonomic Systems |
|
Duff-Norton Mechanical
Actuators, Rotary Unions, Electromechanical Actuators |
|
Equipto
Storage Systems |
|
Hilman Rollers
Riggers Sets |
Harrington Hoists
Chain & Wire Hoists |
|
Joyce/Dayton
Jacks, Actuators |
|
Lyon
Tool Storage, Locker Units
|
|
Perfecting Coupling |
|
Ram-Pac
Hydraulic Tools
|
Stanley Bostitch
Pneumatic Tools, Fasteners
|
Simplex
Jacks and Braces |
|
In-Plant Offices, Mezzanines
|
 |
| |
|
Roof
Hatch/Skylight Systems:
Finally - A Fall
Prevention System that protects your investment while Complying with
OSHA regulations!
SR2K is THE ONLY non-penetrating
system on the market today that fully complies with OSHA regulations
unlike other available systems.
(Certified test results to document the compliance are available upon
request).
A setup using a chain DOES NOT meet
(Standards - 29 CFR ) 1910.23 (a)(2)
The chain does not provide a mid-rail as required.
Click here to see the most recent OSHA interpretation.
1910.23(a)(3)(i)
Hinged floor opening cover of standard strength and construction
equipped with standard railings or permanently attached thereto so as to
leave only one exposed side. When the opening is not in use, the cover
shall be closed or the exposed side shall be guarded at both top and
intermediate positions by removable standard railings.
|
Do Not Void Your Warranty!
- Stop Drilling into Roof Decks.
- Stop Drilling into Roof Hatch and Skylight
Curbs.
- Stop Drilling into Floors.
- Stop Drilling - Period!
Features:
- Non-Penetrating.
- Independently tested and shown to meet and
exceed OSHA Fall Protection Regulations for Guardrails.
- Sets up in minutes.
- The engineered bases enables the system to
be set up in numerous configurations (L-Shapes, Straight Runs,
Etc.).
- Easily dismantled for roof deck repair.
- The gate can be opened by the latch pole or
by one of the latches.
- 1-5/8" diameter rails have a quality Powder
Coat finish.
- Use as roof hatch, skylight, fire vent and
floor door protection.
In most situations, OSHA (Std. 29
CFR 1910.23) requires guardrail protection on the exposed sides of
openings in roofs and floors.
BlueWater Mfg. has modified our SafetyRail 2000 guardrail system to meet
those safety concerns. Our Roof Hatch/Skylight Systems exceeds OSHA Std.
29 CFR 1910.23 and 1910.27. It is the only product available in the
market with a gate assembly that meets the same OSHA regulations and
requires no drilling into any surface for installation. The Roof
Hatch/Skylight Systems set up in minutes and are easily dismantled for
roof repair. Sized gates enable the Roof Hatch System to be located
within 6 inches of the open roof hatch.
We can configure or custom manufacture to any size hatch that is not
listed above. Please contact us for more
information.
|
 |
|
Roof Hatch Grab Bars for safe
egress and ingress. |
| |
 |
| Roof Hatch System
protecting a 2'6" X 3' Hatch. |
| |
 |
| Skylight System
protecting a 3' X 4' skylight. |
| |
 |
| Skylight System arranged
in triangle shape |
| |
 |
| 90 deg. welded hinge.
Allows the gate to only open away from the hatch. |
|
Roof Deck Protection:
100029 - Roof Pads for BUR Roofs
100034 - Rubber Roof Pads for Single-Ply Roof Types
Skuttle/Roof Hatch Kits (Powder Coated
Rails)
(Includes: 1 Sized Gate, 2 Sized Rail Sections, 4 Bases and 6 Locking
Pins)
Note: On Side Exit Hatches: 4th Rail and 2ea pins are included.
Stairway Hatch Kits (Powder Coated Rails)
|
| |
|
Back to BlueWater Manufacturing Products |
|
|
|
